Bring a touch of antiquity to your stationery with our antique-inspired wheel wax seal. The whole seal is made with brass, you will be able to design 6 seals and we'll build the wheel for you.
DESIGN REQUIREMENTS - Solid black and white image, no shades or grey, refer to picture 2 for sample - Black represents the engraved area, i.e. it will be raised on wax - DO NOT mirror or reverse your design, please sent it as is (Unless you don't want it to use as a seal) - File format accepted: .jpg, .jpeg, .png - Suggested image size: 1000 x 1000 pixels - TIPS to know if your design work: Zoom it 2mm smaller than the size you order, if the lines/words are clean & clear, it will show up well - IMPORTANT NOTE: Please make sure you have the right to use the image and you will be fully responsible for any future copyright infringement issue of the designs you sent
We'll review your design upon receiving your order and might contact you for a revised design if needed. If you can't send us a revised design and want to cancel, there will be a5-9% cancellation fee, please read HERE for details.
Our wax seals are made with brass. It comes with a velvet bag & box with a hand-stamped light gold foil logo, perfect for your collection or as a gift. Please note the sequence of the designs might not be the same as your uploaded designs.
DIMENSION Wheel: ~2" x 2" x 0.78" / ~5.2cm x 5.2cm x 2cm Impression: ~12mm / ~0.47" in diameter
DO NOT ORDER if any of the below descriptions would make you unpleasant
Brass is a natural material, it will oxidize and form a patina or tarnish when it is exposed to air or moisture. It might have visible scratches & spots due to the production process. It will not affect the clarity or impression of the seal. You can use sandpaper to bring its luster back or clean it in an eco-friendly way, such as lemon juice.
The engraved surface is very small, it might be slightly off-center, but it won't affect the impression.
